Casa > HBM Transductores > HBM CELDAS DE CARGA DE UN SOLO APOYO

HBM CELDAS DE CARGA DE UN SOLO APOYO

Diseñadas para las basculas de bajo perfil y aplicaciones de procesos. Vienen en dos tamaños comunes LE-grandes o SE-pequeñas. La mayoría de los modelos en el mercado estan ahora aprobado por NTEP para las capacidades de 1.000 a 10.000 libras, ya que muchas veces son utilizadas en la industria del transporte marítimo para las basculas de carga. No certificadas NTEP también están disponibles en un rango de pesaje de 250 a 20.000 libras. La mayoría son de aleación de varios materiales o de acero inoxidable.

Productos

Ordenar por: Producto Precio Defecto
  •  por página
HBM A35 SINGLE-ENDED BEAM, ALLOY STEEL (500 to 5000lb)
Full Scale Output: 3.0 mv/v, Bridge Resistance: 350 ohms, nominal, Material/Finish: Alloy steel,
Temperature: Compensated range 14F to 104F/-10C to 40C

Nuestro precio: $261.00
Precio de mercado: $275.00 ahorrar 5%
HBM B35 SINGLE ENDED BEAM STAINLESS STEEL NTEP 1:5000 (250lb to 10klb)

Floor scales, Tanks, Hoppers

Features

Capacity range 250lb - 10000lb.
Low profile
Extremely rugged
High adverse load capability
Environmentally protected
Stainless steel construction
Protection class IP67
FM Certified

Nuestro precio: $280.00
Precio de mercado: $295.00 ahorrar 5%
HBM BBS SINGLE ENDED ROUND BEAM ALLOY STEEL (50lb to 7500lb)
Bending beam load cell (same as BBS1, BBS2, BBS2F). Interchangeable with BLH Model LBG1. The boot is filled with an insulating grease. Factory Mutual approved. 2mv/v, 0.3% nonlinearity, 810/750 ohms (50-1K0, 375/350 ohms (2.5K - 7.5K), 10 ft 4 cond cable, nickel plated steel. NTEP 87-087 S/M III 3,000 div.

Nuestro precio: $403.00
Precio de mercado: $425.00 ahorrar 5%
HBM BLC SINGLE-ENDED BEAM STAINLESS STEEL (1000 to 10,000lb)
Single-ended bending beam uniquely designed for versatile weighing. Directly interchangeable with other widely-used single-ended beams. Durable stainless steel construction with threaded counterboard load hole. Offers easy installation and load introduction. Capacities of 1000 to 10,000 lb (453.6 to 4535.9 kg).

Nuestro precio: $308.00
HBM BLF SINGLE-ENDED BEAM STAINLESS STEEL (2,500 to 5,000lb)
This bending beam is a replacement for the Fairbanks low-profile bending beam. Capacities from 1500 to 5000 lb (680.4 to 2268.0 kg). Integral 15'/4.6 m load cell cable.

Nuestro precio: $508.00
Precio de mercado: $535.00 ahorrar 5%
HBM H35 SINGLE ENDED BEAM STAINLESS STEEL NTEP 1:5000 (500lb to 10klb)

Floor scales, Tanks, Hoppers, Hazardous areas, Food industry.

Features

Capacity range from 500lb to 10000lb.
Stainless steel construction
3 mV/V output, 350 ohm bridge
Hermetically sealed
Protection class IP68
NTEP-certified

Nuestro precio: $346.00
Precio de mercado: $365.00 ahorrar 5%
HBM SB3 SINGLE-ENDED BEAM ALLOY STEEL (1,000 to 50,000lb)
Universal low-profile shear beam designed for precision weight and force measurement. Excellent performance and extreme ruggedness. Its unique rectangular construction provides optimum design efficiency. Universal mounting hardware available. Capacities of 1000 to 100,000 lb (453.6 to 45,359.2 kg).

Nuestro precio: $565.00
Precio de mercado: $595.00 ahorrar 5%
  •  por página
basculas_balanzas_basculas_camioneras